Selecting output destinations [f2 (output), Output destination for the drum instruments, Setting the switches [f3 (control) – Roland TD-12 User Manual
Page 76: Using pads as switches [f1 (pad sw), P. 76), Possibilities (p. 76), Offers many options. see the setup screen (p. 76), You can also switch this with the pads (p. 76)
76
Chapter 9. Settings for the Entire TD-12 [SETUP]
Here you can select the output destination for each TRIGGER
INPUTs, sequencer parts, and the sound input from the MIX
IN jack.
1.
Press [SETUP].
[SETUP] lights, and the “SETUP” screen appears.
2.
Press [F2 (OUTPUT)] - [F1 (PAD)].
The “OUTPUT ASSIGN (PAD)” screen appears.
fig.09-OutAsgn1_70
3.
Press [CURSOR (left/right)] to select the
TRIGGER INPUT.
You can also select by striking the pad.
4.
Use [+/-] or [VALUE] to select the output
destination.
* You can restore all output destinations to factory settings
(MASTR L+R) by pressing [F5 (DEFAULT)] - [F5
(EXECUTE)].
1.
Press [SETUP].
[SETUP] lights, and the “SETUP” screen appears.
2.
Press [F2 (OUTPUT)] - [F2 (OTHER)].
The “OUTPUT ASSIGN (OTHER)” screen appears.
fig.09-OutAsgn2_70
3.
Press [CURSOR (left/right)] to select the
source.
AMB:
Ambience
MFX:
Multi-effects
BACK:
Backing parts of the sequencer
PERC:
Percussion part of the sequencer
CLICK:
Metronome click
MIXIN:
Sound input from the MIX IN jack
4.
Use [+/-] or [VALUE] to select the output
destination.
* You can restore all output destinations to factory settings
(MASTR L+R and PHONES) by pressing [F5 (DEFAULT)] -
[F5 (EXECUTE)].
Pads connected to TRIGGER INPUT 12 (AUX2) and/or 11
(AUX1) can be set to switch drum kits and play back patterns.
1.
Connect the pad(s) to the TRIGGER INPUT 12
(AUX2) and/or 11 (AUX1).
2.
Press [SETUP].
[SETUP] lights, and the “SETUP” screen appears.
3.
Press [F3 (CONTROL)] - [F1 (PAD SW)].
The “PAD SWITCH” screen appears.
fig.09-PadSw_70
4.
Use [+/-] or [VALUE] to select the function.
5.
When setting to “USER,” press [CURSOR] to
move the cursor to “AUX1” and “AUX2.”
6.
Use [+/-] or [VALUE] to select the functions for
the heads and rims of AUX1 and AUX2.
Selecting Output Destinations
[F2 (OUTPUT)]
Output Destination for the Drum
Instruments
Output Destination for the Sequencer
Parts/Metronome Click/Sound Input
from MIX IN [F2 (OTHER)]
Setting the Switches
[F3 (CONTROL)]
Using Pads as Switches
[F1 (PAD SW)]
Function
AUX1
AUX2
Head
Rim
Head
Rim
OFF
OFF
OFF
KIT SELECT1
OFF
KIT#
INC
KIT#
DEC
KIT SELECT2
KIT# DEC
KIT# INC
CHAIN SELECT1
OFF
CHAIN
# INC
CHAIN
# DEC
CHAIN SELECT2
CHAIN# DEC
CHAIN# INC
PATTERN
SELECT1
OFF
PTN#
INC
PTN#
DEC
PATTERN
SELECT2
PTN# DEC
PTN# INC
TD-12_e.book 76 ページ ２００５年２月１８日 金曜日 午後６時３９分