Roland TD-12 - Manual (Page 58)

58
Chapter 6. Sequencer (Playback)
Making the Settings for Each
Percussion Instrument [F2 (EDIT)]
Set the volume, pan, pitch, decay, etc. for each percussion
instrument.
1. Press [F2 (EDIT)].
The “PERCUSSION SET EDIT” screen appears.
fig.06-PercEdit_70
2. Press [CURSOR] to select the parameter.
3. Use [+/-] or [VALUE] to make settings.
CC: Specifies how the instrument which changes the tone
like a snare (striking position) or hi-hat (pedal position)
sounds.
4. Press [EXIT] to return to the “PERCUSSION
SET EDIT” screen.
Naming a Percussion Set [F3 (NAME)]
Each percussion set can be named (up to 12 characters).
fig.06-PercName_70
1. Press [F3 (NAME)].
The “PERCUSSION SET NAME” screen appears.
2. Press [CURSOR (left/right)] to move the cursor
to the character to be changed.
3. Use [VALUE], [+/-], or [CURSOR (up/down)] to
change the character.
Function Buttons
[F1 (INSERT)]
A blank space is inserted at the cursor position.
[F2 (DELETE)]
Character at the cursor position is deleted.
[F3 (SPACE)]
Character at cursor position is replaced by a blank space.
[F4 (CHAR)]
Character at the cursor position changes between
uppercase/lowercase alphabet, or numbers and symbols.
4. Press [EXIT] to return to the “PERCUSSION
SET EDIT” screen.
Parameter Value Description
Perc Note 0 (C -)–127 (G 9) Note number to
be set
(Inst) Refer to Drum In-
strument List (p.
88).
Instrument
Volume 0–127 –
Pan L15–CTR–R15 Stereo position
Pitch -480–+480 –
Decay Time -31–+31 –
Rev Send Level 0–127 Amount of re-
verb
CC 0–127 See below.
TD-12_e.book 58 ページ ２００５年２月１８日 金曜日 午後６時３９分