Rosewill RC200 User Manual
Page 20
ULTRA ATA/133 PCI RAID Card
RC200 User Manual
20
f. Once the system can find the HD connecting to RC-200, you can follow the normal
steps to complete the Windows installation.
3.
If you want to create a mirror with a HD with existing OS and a fresh HD, the data on
existing HD will copy to fresh HD and boot as RAID 1. In addition, based on the
above situation, if a bootable HD on the RC200 is desired. It means in this case you
will boot our computer from RC200 instead of motherboard. Please follow the
following instructions. a~d to complete the installation.
a. Install RC-200 to an existing OS HD connecting to motherboard.
b. After RC-200 install complete, turn off PC. Take the original HD off from
motherboard and connect to RC-200. Take another fresh HD to connect to RC-200