Rosewill RC200 User Manual
Page 28
ULTRA ATA/133 PCI RAID Card
RC200 User Manual
28
6.
Inset the driver CD into CD ROM Drive, and they type D:\RC-200\raid (Note: “D:\”
represents the drive letter assigned to the CD-ROM drive you are using. If D is not letter
of your CD-ROM drive, substitute D with the correct drive letter), then click OK.
7.
The Hardware Installation window pops up, click Continue Anyway, the Finish.
8.
Click Next again, then Finish.
9.
Restart Windows to complete driver installation.
＊
To Verify Windows® 2000/XP/Server 2003 Installation
1.
Right click My Computer and click Manage.
2.
Select Device Manager.
3.
Double click SCSI and RAID Controller, then double click Silicon Image SiI 0680
ultra-133 Medley ATA Raid Controller to display driver properties. A message this
device is working properly is displayed in the dialog box, the driver has been correctly
installed.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com/ for complete warranty information and future support
for your product.