Raritan Computer CCA-0N-V5.1-E - Manual (Page 311)

Chapter 15: Advanced Administration
293
Serial Admin Port
The serial admin port on CC-SG can be connected directly to a Raritan
serial device, such as Dominion SX or KSX.
You can connect to the SX or KSX via the IP address using a terminal
emulation program, such as HyperTerminal or PuTTY. Set the baud rate
in the terminal emulation program to match the SX or KSX baud rate.
SX requirements:
Use an ASCSDB9F adapter to connect the CC-SG unit to the SX. Use
the default SX port settings: 9600 bps, Parity = None/8, Flow Control =
None, Emulation = VT100.
V1 Serial Admin Port:
E1 Serial Admin Port:
- OR -
About Terminal Emulation Programs
HyperTerminal is available on many Windows OS. HyperTerminal is not
available on Windows Vista.
PuTTY is a free program you can download from the internet.