Add a blade chassis device – Raritan Computer CCA-0N-V5.1-E User Manual

Page 82

Advertising
background image

Chapter 6: Devices, Device Groups, and Ports

64

Add a Blade Chassis Device

The procedure to add a blade chassis device varies depending on the
blade chassis type.

A blade chassis device always show two names in the Devices tab: the
name without the parentheses is retrieved from the KX2 device, and the
name within the parentheses is the chassis name saved on CC-SG.

To add a blade chassis device with an integrated KVM switch:

1. Configure the blade chassis in KX2 properly. See the KX II User

Guide.

2. Configure the KX2 device in CC-SG properly. See

Add a KVM or

Serial Device

(on page 54).

3. CC-SG detects the blade chassis device and adds the blade chassis

icon in one or two tabs:

 In the Devices tab, the blade chassis device appears beneath the

KX2 device to which it is connected.

 In the Nodes tab, if you have entered the IP address or hostname

for the blade chassis on the KX2 device, the blade chassis
appears as a node with a Web Browser interface added to it.

Note: For this type of blade chassis, you must configure blade servers
later. See

Configuring Slots on a Blade Chassis Device

(on page 65).

To add a blade chassis device without an integrated KVM

switch:

1. Configure a blade port group for the blade servers in KX2 properly.

See the KX II User Guide.

2. Configure the KX2 device in CC-SG properly. See

Add a KVM or

Serial Device

(on page 54).

3. CC-SG automatically creates a virtual blade chassis and adds the

blade chassis icon in one tab. Note that a virtual blade chassis never
appears as a node in the Nodes tab.

 In the Devices tab, the virtual blade chassis device appears

beneath the KX2 device, as a virtual container to the blade
servers, which appear beneath the virtual blade chassis.

Note: If you did not configure a blade port group for the blade servers
before configuring the KX2 ports in CC-SG, you can choose Devices >
Device Manager > Launch Admin to set the blade port group. Then
configure the blade servers in CC-SG. See

Configuring Slots on a

Blade Chassis Device

(on page 65).

Advertising