Raritan Computer CCA-0N-V5.1-E - Manual (Page 97)

Chapter 6: Devices, Device Groups, and Ports
79
To add a port to the CSV file:
Use the DEVICE-PORT tag only if you add a device with Configure All
Ports set to FALSE, and you want to specify ports individually. The ports
you add must be un-configured in CC-SG when you import the CSV file.
Column
number Tag or value Details
1 ADD The first column for all tags is the
command ADD.
2 DEVICE-PORT Enter the tag as shown. Tags are not
case sensitive.
3 Device Name Required field.
4 Port Type Required field.
Enter the port type as shown here:
KVM
SERIAL
OUTLET or POWER
Use "OUTLET" or "POWER" for
configuring outlets on a PX device.
5 Port or Outlet Number Required field.
6 Port or Outlet Name Optional. If left blank, a default name
or the name already assigned at the
device level will be used.
7 Node Name For KVM and Serial ports, enter a
name for the node that is created
when this port is configured.
To add a blade to the CSV file:
Column
number Tag or value Details
1 ADD The first column for all tags is the
command ADD.
2 DEVICE-BLADE Enter the tag as shown.
Tags are not case sensitive.
3 Device Name Required field.
4 Port Number Required field.
5 Blade Number Required field.