Raritan Computer CCA-0N-V5.1-E - Manual (Page 85)

Chapter 6: Devices, Device Groups, and Ports
67
To delete a slot using the Delete Blade command:
1. In the Devices tab, click the + next to the KX2 device that is
connected to the blade chassis device.
2. Click the + next to the blade chassis device whose slots you want to
delete.
3. Right-click the blade slot that you want to delete.
4. Select Delete Blade, and then click OK to delete the slot.
Edit a Blade Chassis Device
You can edit a blade chassis device to rename it, modify its properties,
and view slot configuration status.
To edit a blade chassis:
1. In the Devices tab, click the + next to the KX2 device that is
connected to the blade chassis device.
2. Select the blade chassis device you want to edit.
3. Type the new device properties in the appropriate fields on this
screen. If necessary, edit the Categories and Elements associated
with this device.
4. Click the Blades tab to view all slots of this blade chassis device.
5. If a slot has been configured as a node, you can click the Node
hyperlink to open the Node Profile. Optional.
6. Click OK to save your changes. A message appears when the
device has been modified.
Delete a Blade Chassis Device
You can delete a blade chassis device connected to a KX2 device from
CC-SG. When you delete the blade chassis device from the KX2 device,
the blade chassis device and all configured blade servers or slots
disappear from the Devices tab as well as from the Nodes tab.
To delete a blade chassis device:
1. Click the Devices tab and select a KX2 device whose blade chassis
device you want to delete.
2. Choose Devices > Port Manager > Delete Ports.
3. Select the checkbox of the blade chassis port you want to delete.
4. Click OK to delete the selected blade chassis port. A message
appears asking you to confirm the deletion of the blade chassis
device along with all of its blade servers.