Ricoh DDST A - Manual (Page 37)

Setting Originals
31
4
❖ Originals that can and cannot be
placed in the ADF
For details about the originals that
can and cannot be placed in the
ADF, see Copy Reference.
Attempting to use originals un-
suitable for the ADF can lead to a
misfeed and damage to the origi-
nals. Place such originals directly
on the exposure glass.
Important
❒ For details about original sizes
that can be detected automatical-
ly and notes on placing originals
in the ADF, see Copy Reference.
A
Adjust the original guide to match
the size of the originals.
B
Place the originals with the side
to be scanned facing up.
For originals which are to be
scanned on both sides, the first
side should face up.
There are two orientations.
❖ When placing the originals so that the
top edges touch the back of the ADF
❖ When placing the top edges of the
originals first
When using the machine as a
network TWAIN scanner, this
orientation is the standard set-
ting for the TWAIN driver. Nor-
mally, use this orientation for
placing originals.
Note
❒ Originals of the same width and
different length can be placed at
the same time. Place the origi-
nals as shown:
1. ADF placement orientation
2. Height
❒ Originals are scanned in the in-
serted order, starting from the
topmost page.
C
Select the original orientation ac-
cording to the orientation of the
placed originals.
Reference
p.29 “Specifying original orien-
tation and setting originals”
AAH006S
AAH007S
AAH022S