Ricoh DDST A - Manual (Page 40)

Troubleshooting
34
5
❖ Alert messages
Messages/Second messages Causes Solutions
Change Tray # to the follow-
ing settings:
xxx yyy
The settings of the selected pa-
per tray are different from
those specified for printing.
# indicates the tray number.
xxx indicates the tray number.
yyy indicates the paper size.
Press [JobReset] to change the
paper tray settings, or press
[FormFeed]
to print regardless.
For details about the paper
tray settings, see General Set-
tings Guide.
Collate cancelled. The collate print function has
been canceled. Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Collate: Page max. The maximum number of pages
has been exceeded for collation. Turn off the main power
switch, and back on again. Re-
duce the number of pages to
be printed, or, increase memo-
ry capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.
Duplex cancelled. Duplex printing has been can-
celed. Check the paper used is suita-
ble for duplex printing, or, in-
crease memory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.
Duplex mode is in off posi-
tion for Tray # The selected paper tray has
not been configured for du-
plex printing.
# indicates the tray number.
Press [JobReset] to change the
paper tray settings, or do sin-
gle-sided printing.
For details about the tray set-
tings, see General Settings Guide.
Ethernet Board Error An error has occurred in the
Ethernet interface. Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Exceeded max. print size.
Press FormFeed/JobReset.
The page images to be printed
exceed the maximum print area. Press [JobReset] to change the
paper tray settings, or press
[FormFeed]
to print regardless.
I/O buffer overflow The maximum size of the I/O
buffer has been exceeded. Increase the size of the I/O
buffer through the Host Inter-
face menu.
Load paper in Tray # There is no paper in the select-
ed paper tray.
# indicates the tray number.
Load the tray with paper.