Ricoh DDST A User Manual
Page 45
The Printer Function
39
5
Note
❒ If the problem cannot be solved, contact your sales or service representative.
It takes a long
time to complete a
print job.
The data is large or complex so it takes time to process. If the Data In indi-
cator is blinking, data is being processed. Wait until printing resumes.
It takes too much
time to resume
printing.
The data is large or complex so it takes time to process. If the Data In indi-
cator is blinking, data is being processed. Wait until printing resumes.
The machine is in Energy Saver mode. To resume from Energy Saver
mode, it has to warm up, and this takes time. See General Settings Guide.
Paper is not fed
from the selected
tray.
When you are using a Windows operating system, printer driver settings
override those set using the control panel. Set the desired input tray using
the printer driver.
Optional compo-
nents connected to
the machine are
not recognized
when using Win-
dows 98SE / Me,
Windows 2000 /
XP, and Windows
Server 2003.
You have to configure the option setup in printer properties when bidirec-
tional transmission is not enabled.
See the printer driver Help.
Images are print-
ed in the wrong
orientation.
The feed orientation you selected and the feed orientation selected in the
printer driver's option setup might not be the same. Set the machine's feed
orientation and the printer driver's feed orientation accordingly.
See the printer driver Help.
The printed image
is different from
the image on the
computer's dis-
play.
With certain functions, such as enlargement and reduction, image layout
might be different to that on the computer display.
Problem
Causes and Solutions