Radio Shack pmn - Manual (Page 14)

14
Telephone Operation
CHANGING THE CHANNEL
The SP-514 scans 25 channels (frequency pairs used between the
base and the handset) and automatically selects a clear channel
each time you make or receive a call.
If you hear other conversa-
tions or excessive noise dur-
ing a call, press
CHANNEL on
the handset to select a differ-
ent channel.
Note: If the handset is too far
from the base, the channel
might not change. Move clos-
er to the base and try again.
USING REDIAL
You can quickly redial the last
number dialed. Simply lift the
handset and press
PHONE .
When you hear the dial tone,
press
REDIAL .
Notes:
² The redial memory holds
up to 16 digits, so you can
redial long-distance as well
as local numbers.
² We recommend you not use REDIAL to dial numbers that
include a tone entry. This could result in a wrong number being
dialed. (See “Using Tone Services on a Pulse Line” on Page 16.)
² The redial memory only stores digits entered after you press
FLASH (see “Using Flash” on Page 15).
43-5514.fm Page 14 Wednesday, August 18, 1999 12:47 PM