Radio Shack pmn - Manual (Page 16)

16
Telephone Operation
USING TONE SERVICES ON A PULSE LINE
Some special services, such as bank-by-phone, require tone sig-
nals. If you have pulse service, you can still use these special tone
services by following these steps.
1 Dial the service’s main number.
2 When the service answers, press TONE ( ). Any additional
numbers you dial are sent as tone signals.
3 After you complete the call, return the handset on the base or
press PHONE. The phone automatically resets to pulse dialing.
USING PAGE/HANDSET LOCATOR
You can use the SP-514 as a pager and handset locator between
the base and the handset. This is useful if the handset is away
from the base and you want to locate it, or if you want to signal the
person holding the handset.
To page the person who has
the handset or to locate the
handset when the phone is
not in use, press
PAGE/
HANDSET LOCATOR on the
base. The keypad lights and
the handset sounds a three-
beep signal. If you want the
handset to beep for a longer
time, hold down
PAGE/HAND-
SET LOCATOR for about 4
seconds. The handset beeps
for about 3 minutes.
43-5514.fm Page 16 Wednesday, August 18, 1999 12:47 PM