Placing the base on a desk top – Radio Shack pmn User Manual
Page 7
7
Installation
PLACING THE BASE ON A DESK TOP
Follow these steps when you place the base on a desk, shelf, or
table.
1
Plug one end of the supplied long modular cord into the modu-
lar cord jack on the back of the base.
2
Route the modular cord through the channel slot on the bottom
of the base.
3
Insert the supplied AC adapter’s barrel plug into the
POWER
jack on the back of the base.
4
Route the adapter’s cord through the other channel slot on the
bottom of the base.
5
Plug the modular cord’s other end into a modular phone line
jack.
6
Plug the adapter into a standard AC outlet.
7
Fully extend the base’s antenna and raise it to a vertical posi-
tion.
Modular Cord
POWER Jack
Channel Slots
(bottom of base)
Antenna
Jack
43-5514.fm Page 7 Wednesday, August 18, 1999 12:47 PM