Installing and charging the battery pack – Radio Shack pmn User Manual

Page 9

Advertising
background image

9

Installation

INSTALLING AND CHARGING THE BATTERY PACK

The SP-514 is packaged with a rechargeable nickel-cadmium bat-
tery pack. Before using your phone, you must install the battery
pack and then charge it for 10 hours.

Press down and slide off the
compartment cover. Plug the
battery connector into the
socket inside the compart-
ment. Then place the battery
pack into the compartment
and replace the cover.

Note: The connector fits only one way. Do not force it.

To charge the battery pack,
simply place the handset
facedown on the base. The
CHARGING indicator on the
base lights.

Recharge the battery pack
when the LOW BATT indica-
tor on the handset flashes.

LOW BATT
Indicator

43-5514.fm Page 9 Wednesday, August 18, 1999 12:47 PM

Advertising