Runco LIGHTSTYLE LS-3 - Manual (Page 100)

Specifications
84 Runco LS-3/LS-5 Installation/Operation Manual
P
RELI
M
INARY
Performance
Microdisplay: Texas Instruments DLP® 1080p DMD
Native Resolution: Full HD, 1920 x 1080 (2,073,600 pixels)
Aspect Ratios: Native (Pixel-to-Pixel), 16:9, Letterbox, 4:3, 4:3 Narrow,
Letterbox (Anamorphic lens compatible)
Projection Lens: All glass, F/2.5~2.71, f = 39.1~50.1mm, 1.3x manual
zoom, made in Japan
Throw Ratios: 1.85 – 2.40 (distance/width) – Standard lens
1.56 – 1.86 (distance/width) – Optional short-throw lens
Vertical Lens Shift Range
(Ceiling Mount):
LS-3:
Down = 25% to 60% of screen height below lens center
(50% to 120% of one half of the screen height)
LS-5:
Up = 25% of screen height above lens center
(50% of one half of the screen height)
Down = 60% of screen height below lens center
(120% of one half of the screen height)
Horizontal Lens Shift Range: LS-3: None
LS-5: 7.5% of screen width left or right of lens center
(15% of one half of the screen width)
Video Lumens: 1,000 ANSI lumens (maximum) calibrated at D65
Sequential Contrast –
ConstantContrast On: LS-3: 10,000:1 typical
LS-5: 15,000:1 typical
Cooling Performance: High efficiency adaptive voltage side-to-side cooling
with low system acoustic noise level and low light
pollution cabinet
Projection Modes: Front, Rear, Ceiling (front/rear)
Lamp: User replaceable 180/230W HPM (selectable), 4000
hour lifetime at 180W setting
Video Processing: Runco advanced ViVix processing with 10 bit
independent dual channel image processing, true 1080i
deinterlacing, MPEG artifact reduction (block and
mosquito noise), latest motion adaptive processing, 3D
noise reduction, detail enhancement, rich color
processing and noise reduction, less than one frame
latency
Calibration: Full RGB gain/offset control (White Balance), Gamma,
Contrast, Color Temperature, Brightness
Table 7-1. LS-3/LS-5 Specifications (continued)