Runco LIGHTSTYLE LS-3 - Manual (Page 89)

Serial Communications
Runco LS-3/LS-5 Installation/Operation Manual 73
PRE
L
IMINAR
Y
gam.crt
(none) 0x86 0xC6 Switch to CRT gamma.
gam.film
(none) 0x87 0xC7 Switch to Film gamma.
gam.vide
(none) 0x88 0xC8 Switch to Video gamma.
gam.brig
(none) 0x89 0xC9 Switch to Bright Room gamma.
gam.pc (none) 0x8A 0xCA Switch to PC gamma.
src.1
0x8B 0xCB Switch the active source to source 1.
src.2
0x8C 0xCC Switch the active source to source 2.
src.3
0x8D 0xCD Switch the active source to source 3.
src.4
0x8E 0xCE Switch the active source to source 4.
src.5
0x8F 0xCF Switch the active source to source 5.
bla.tog
(none) 0x90 0xD0 Toggles between blank screen and regular
display.
bla.on
(none) 0x91 0xD1 Turn blank screen on.
bla.off
(none) 0x92 0xD2 Turn blank screen off.
osc.sw
0x93 0xD3 Switch to the next Overscan mode.
osc.zoom
(none) 0x94 0xD4 Switch to Overscan Zoom.
osc.crop
(none) 0x95 0xD5 Switch to Overscan Crop.
osc.off
(none) 0x96 0xD6 Switch to Overscan Off.
mem.sw
(none) 0x97 0xD7 Switch to the next user memory.
mem.1
0x98 0xD8 Recall user memory associated with the M1
key.
mem.2
0x99 0xD9 Recall user memory associated with the M2
key.
mem.3
0x9A 0xDA Recall user memory associated with the M3
key.
isf.day
(none) 0x9B 0xDB Recall ISF Day user memory.
isf.nigh
(none) 0x9C 0xDC Recall ISF Night user memory.
asp.sw
0x9D 0xDD Switch to the next aspect ratio.
Table 6-1. Serial Command Key Names and IR Codes (continued)
RS232
Keyname
Remote Button
IR Code
Description
Set 1 Set 2
1
2
3
4
5
OS
M1
M2
M3