Runco LIGHTSTYLE LS-3 - Manual (Page 48)

Installation
32 Runco LS-3/LS-5 Installation/Operation Manual
PRE
L
IMINAR
Y
Vertical Lens Shift: To shift the projected
image vertically, insert the provided hex
wrench into the hole at the top of the projector
(directly above the lens). Then, turn the
wrench as shown to shift the lens in the
desired direction.
Horizontal Lens Shift (LS-5 only): To shift
the projected image horizontally, insert the
provided hex wrench into the hole at the top
of the projector. Then, turn the wrench as
shown to shift the lens in the desired direction.
When you have finished adjusting the lens position, re-install the Runco badge.