Radio Shack DX-398 - Manual (Page 14)

14
ATS/MW — selects the MW (medium wave) band and lets you select MW stations
using your receiver’s automatic tuning system.
METER/SW — selects the SW (shortwave) band, and lets you scan for a shortwave
frequency in one of the receiver’s 14 meter bands.
Number Keys — each key has a single-digit label and a band range. The single
digits are used to enter a channel, frequency, or ID number. The band range
(120m, for example) indicates the shortwave band you can tune by pressing that
key.
• — enters a decimal point or clears an incorrect entry.
C (cancel) — cancels an entry.
F/FREQ (frequency) — lets you tune a frequency directly.
M/MEM — stores frequencies into memory.
ENTER — enters a frequency.
TIMER 1, TIMER 2, TIMER 3 — let you select any of the receiver’s three timers.
WORLD/HOME — lets you select the time you want to display (world time or your
home time).
AM MODE — lets you set up the alarm timer.
— lets you lock out selected frequencies.
EDIT — lets you assign a name for each FM, MW, or LW station or for each page
where you stored an SW station.
PAGE — lets you select either of the receiver’s memory pages (see “Memory Func-
tions” on Page 27).
PRIORITY — tunes to the priority station you set.
TUNING / — tunes up or down the band you selected.
M