Radio Shack DX-398 - Manual (Page 31)

31
4. Use the number keys to enter the
new memory location number.
The receiver beeps.
USING PRIORITY
You can store one MW/LW/FM station
as the priority station, then quickly re-
call it.
1. Tune to your favorite station.
2. Press M/MEM.
3. Press PRIORITY to store the sta-
tion in the priority location.
Note: If you previously stored a
priority station, pressing
PRIORITY
replaces it.
4. To tune to the priority station,
press PRIORITY . The receiver
tunes to the priority station.
The receiver stores a SW priority sta-
tion differently than an MW/LW/FM
station. It stores a page containing 9
stations (including the SW station you
want to store as the priority station) in
a memory location.
1. Use the steps under “Tuning Pre-
programmed Shortwave Stations”
on Page 20 to tune to the page
where you stored your favorite
shortwave station.
2. Press M/MEM to store the page
containing the desired station.
3. Press PRIORITY to store the page
with the desired station in the pri-
ority location.
Note: If you previously stored a
priority station, pressing
PRIORITY
replaces it.
4. To tune to the priority station,
press PRIORITY . The receiver
tunes to the page you selected
then to the strongest frequency
among the 9 preset stations.
Note: If there is a stronger station
on the page you selected, the
receiver might tune to it instead of
the station you selected.
5. Press the memory location num-
ber you selected in Step 1 under
“Tuning Preprogrammed Short-
wave Stations” on Page 20 to tune
to the priority station.