Radio Shack DX-398 - Manual (Page 33)

33
Turning a Timer Alarm
On or Off
To turn off the alarm so it does not
sound again, press
TIMER 1 , TIMER 2 ,
or TIMER 3 . Then press C while
flashes.
If you want to turn on a timer alarm
again, press
TIMER 1, TIMER 2, or TIM-
ER 3 . Then press ENTER while
and 1 , 2 , or 3 flash.
Timer Recording
You can connect a tape recorder to
the receiver and have it record starting
at a preset time.
Connect your tape recorder as de-
scribed in “Connecting a Tape Re-
corder” on Page 10 and set your tape
recorder to record. Then follow the
steps in “Using the Timer Alarms” on
Page 32 to have the radio start to play
at the time you want.
When the radio plays at the time you
set, the tape recorder starts and
records the broadcast.
USING THE SLEEP
TIMER
The sleep timer lets you set the re-
ceiver to turn off in an amount of time
you set.
1. With the receiver off, hold down
POWER until the receiver beeps
and turns on. 90 appears and
flashes.
After a few seconds, 90 disap-
pears and stops flashing.
2. Tune to the desired station.
After the preset number of minutes, the
receiver turns off. To turn off the re-
ceiver sooner, press
POWER .
To change the playing time after you
set it, hold down
POWER . The sleep
timer changes from 90
→
80
→
70
→
60
→
50
→
40
→
30
→
20
→
10
→
90
minutes, repeating the sequence as
you hold down
POWER . Release POW-
ER when the desired amount of time
appears.
TIMER
TIMER