Ricoh 1013F - Manual (Page 32)

Copying
20
2
Loading Originals in the
Document Feeder (ADF)
Note
❒ The original might become dirty if
it is written with a pencil or similar
tools.
❒ Do not place any foreign objects on
the document feeder (ADF) or cov-
er it with your hand.
Reference
Regarding originals that the docu-
ment feeder (ADF) can handle, see
p.10 “Originals”.
AAAA
Adjust the guide to the original
size.
BBBB
Place the aligned originals face
up into the document feeder
(ADF).
1. Limit mark
2. Document guide
Note
❒ Do not stack originals above the
limit mark.
❒ To avoid a multi-sheet feed,
shuffle the originals before set-
ting them in the document feed-
er (ADF).
Placing Standard Size
Originals
Note
❒ When the copy paper size and the
original size differ, follow the steps
below.
AAAA
Press the
{{{{Menu}}}} key.
BBBB
Press the 0 0 0 0 or 1 1 1 1 key to select "3.
Original Size", and then press the
{{{{OK}}}} key.
Note
❒ You can also enter this mode by
pressing the
{{{{R/#}}}} key.
❒ When the bypass tray is select-
ed, the
{{{{R/#}}}} key does not work
to enter this mode.
StellaC-AE-CopyF_V4_FM.book Page 20 Wednesday, July 4, 2001 11:21 AM