Ricoh 1013F - Manual (Page 39)

Copying from the Bypass Tray
27
2
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP
transparencies, adhesive labels, trans-
lucent paper, postcards, envelopes,
and copy paper that cannot be set in
the paper tray.
Note
❒ If you do not use standard size
copy paper, you should enter ver-
tical and horizontal dimensions.
The sizes that you can enter are as
follows:
Reference
For details about paper capacity in
the bypass tray, see p.12 “Copy Pa-
per”.
AAAA
Open the bypass tray.
BBBB
Push up the paper guide release
lever.
1. Paper guide release lever
CCCC
Gently insert the copy paper face
d o w n a n d a d j u s t t h e p a p e r
guides.
1. Horizontal size
2. Vertical size
3. Extender
4. Paper guides
Important
❒ If the guides are not flush with
the copy paper, a skew image or
paper misfeeds might occur.
Metric version • Vertical: 90 –
216mm
• Horizontal: 140 –
356 mm
Inch version • Vertical: 3.5" – 8.5"
• Horizontal: 5.5" –
14"
StellaC-AE-CopyF_V4_FM.book Page 27 Wednesday, July 4, 2001 11:21 AM