Ricoh 1013F - Manual (Page 41)

Copying from the Bypass Tray
29
2
FFFF
Gently insert the OHP transpar-
encies face down and adjust the
paper guide.
Important
❒ The side of OHP transparencies
that is copied is fixed. Before
you place the OHP transparen-
cies in the bypass tray, check the
cutting position of the OHP
transparencies.
When copying onto standard
size paper
Important
❒ You should specify the size of pa-
per to avoid paper misfeeds.
Note
❒ The default copy paper size for the
paper tray, the optional paper tray
unit and the bypass tray is A4,
8
1 /
2
"
× 11"L
AAAA
Press the
{{{{R/#}}}} key.
BBBB
Make sure that "Standard Size" is
selected, and then press the
{{{{OK}}}}
key.
Note
❒ If not, press the 0 or 1 key to
select it.
CCCC
Press the
0 0 0 0 or 1 1 1 1 key to select pa-
per size, and then press the
{{{{OK}}}}
key.
When copying onto custom
size copy paper
Important
❒ You should specify the size of pa-
per to avoid paper misfeeds.
AAAA
Press the
{{{{R/#}}}} key.
BBBB
Press the 0 0 0 0 or 1 1 1 1 key to select
"Custom Size", and then press the
{{{{OK}}}} key.
StellaC-AE-CopyF_V4_FM.book Page 29 Wednesday, July 4, 2001 11:21 AM