Ricoh 1013F - Manual (Page 61)

Changing the Paper Size
49
3
FFFF
Square the paper and load it in
the tray.
Important
❒ Do not stack paper over the lim-
it mark.
GGGG
Adjust the side and back fences to
the new paper size.
Important
❒ When setting small quantities of
copy paper, be careful not to
squeeze in the side fence too
much or paper will not be fed
properly.
HHHH
Push the paper tray in until it
stops.
Note
❒ Select the new paper size with
the User Tools. See p.51 “Select-
ing the Paper Size with the User
Tools”.
Changing the Paper Size in the
Optional Paper tray unit
AAAA
Make sure that the paper tray is
not being used.
BBBB
Pull out the paper tray until it
stops.
Note
❒ Remove any remaining copy
paper.
CCCC
Adjust the back fence.
Note
❒ When you load 8 1 /
4
" × 14"L or
8 1 /
2
"
× 14"L copy paper, place
the back fence in the corner
pocket on the left.
StellaC-AE-CopyF_V4_FM.book Page 49 Wednesday, July 4, 2001 11:21 AM