Ricoh 1013F - Manual (Page 58)

Troubleshooting
46
3
h h h h Clearing Misfeeds
R CAUTION:
Important
❒ When clearing misfeeds, do not turn off the power switch. If you do, your
copy settings are cleared.
❒ To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
❒ If paper misfeeds occur repeatedly, contact your service representative.
Note
❒ More than one misfed areas may be indicated. In this case, check every appli-
cable area. Refer to the following charts: A, P, Y.
❒ You can find a sticker explaining how to remove misfed paper inside of the
right cover.
❒ When the machine instructs you to place originals once again, place your
originals in the feeding position. The display might indicate the number of
originals you should return.
• The fusing section of this equipment might be very hot. You should be very
careful that you don't touch this section when removing the misfed paper.
StellaC-AE-CopyF_V4_FM.book Page 46 Wednesday, July 4, 2001 11:21 AM