Installing batteries using the remote, Installing batteries, Using the remote – Radio Shack CD Player User Manual

Page 13

Advertising
background image

13

Installing Batteries

Your CD recorder's remote control requires
two AA batteries (not supplied) for power.
We recommend alkaline batteries, available
at your local RadioShack store, for the best
performance and longest life.

Cautions:

• Always use fresh batteries of the

required size and recommended type.

• Do not mix old and new batteries,

different types of batteries (standard,
alkaline, or rechargeable), or
rechargeable batteries of different
capacities.

1. Press down on the battery compartment

cover and slide it off in the direction of
the arrow.

2. Insert the batteries into the battery

compartment as indicated by the
polarity symbols (

+

and

) marked

inside.

3. Replace the cover.

When the remote control operates erratically
or does not work, replace the batteries.

Cautions:

• Never leave dead or weak batteries in

the remote control. Batteries can leak
chemicals that can corrode the remote.

• If you do not plan to use the remote

control for a month or more, remove
the batteries.

Using the Remote

For the best results, point the remote control
toward REMOTE SENSOR on the front of
the CD recorder.

Advertising