Radio Shack CD Player - Manual (Page 16)

16
Operation
Playing CDs
You can use the RECORD/PLAYBACK tray
to play back CD, CD-R, and CD-RW discs.
You can use the PLAYBACK tray to play
back CD and finalized CD-R/CD-RW discs.
You cannot play CD-R/CD-RW discs that
haven’t been finalized on the PLAYBACK
tray.
1. Press POWER on the CD recorder.
READING flashes for a while. When
no disc is set, no DISC or DISC no
appears.
2. Press OPEN/CLOSE for the PLAYBACK
tray or the RECORD/PLAYBACK tray.
3. Carefully place the disc, label side up,
into the recessed CD holder.
4. Press OPEN/CLOSE for the PLAYBACK
tray or the RECORD/PLAYBACK tray to
close the disc tray. When a disc is
loaded into the CD recorder,
READING flashes for a while as it
determines the contents of the disc.
When the CD recorder reads the TOC
(Table of Contents), the display shows
the total number of tracks, total play
time, and the type of disc (the
RECORD/PLAYBACK tray only).
• When a blank disc is set on the
RECORD/PLAYBACK tray, BLANK
appears.
• When a disc is set on the RECORD/
PLAYBACK tray, the display shows
one of the following:
CD — a commercial pre-recorded CD.
CD-R — finalized CD-R.
CD-R, NO TOC — a CD-R which
has yet to be finalized.
CD-RW, NO TOC — a CD-RW
which has yet to be finalized.
CD-RW — a finalized CD-RW.
BLANK — No disc or unreadable disc.
5. Press ² for the PLAYBACK tray or
² /ENTER for the RECORD/
PLAYBACK tray to start playback.
6. Press
†
to temporarily stop playback.
To resume playback, press
†
, ² or ² /
ENTER .
7. Press G to stop playback.
If you set CDs on both the PLAYBACK tray
and the RECORD/PLAYBACK tray, the CD
recorder automatically plays the other CD
when the current CD finishes. The CD
recorder stops playing at the end of the
second CD.
Selecting a Track
Press
B
or
C
repeatedly until you find the
desired track.
• When you press
B
once during
playback, the CD recorder plays the
current track from the beginning. To
return to the beginning of the previous
track, press
B
twice.
• In the stop or pause mode, the CD
recorder enters pause mode at the
beginning of the selected track. Press
² to start playback.