Radio Shack CD Player - Manual (Page 28)

28
DUBB 4X — 4X speed dubbing from the
PLAYBACK tray to the RECORD/
PLAYBACK tray.
ERASE ** — Erase the last track of the
CD-RW disc.
ERASE ALL — Erase all the track of the
CD-RW disc.
FINALIZE — Finalize the disc.
INCLVL** — Increment level
MANUAL — Auto track division is off.
NO DISC — No disc is set on the tray.
OPEN — Open the tray.
PMA WRITE — Writing the recorded
memories on the disc. (PMA: Program
Memory Area)
READING — The CD recorder is reading
the disc.
REC **DB — Recording level
STEP ** — Program number
SYNC-1 — Record one track
synchronously.
SYNC-ALL — Record all the tracks
synchronously.
UNFINALIZ — Unfinalize the CD-RW
disc.
Note: ** indicates variable.
Error Messages
When an error message appears, press D and
check the cause.
CAN’T REC — Cannot record, erase, or
finalize the disc. Change the disc. If the CD-
RW disc is finalized, unfinalize it. See
“Erasing or Unfinalizing a CD-RW” on
Page 24.
D-UNLOCK — Digital input is selected,
but the digital source is not connected or the
source’s power is off.
DISC FULL — There is no space on the
disc, or no tracks are available.
NO CD-DA:D2 — Discs designed for
computing systems cannot be used for
recording. Use the discs bearing DIGITAL
AUDIO mark.
NO SPACE:D2 — The recordable space
of the CD-R/CD-RW disc set in the
RECORD/PLAYBACK tray is not enough to
dub the whole disc in the PLAYBACK tray.
Dubbing stops halfway.
PGM FULL — 32 tracks have been
programmed. You cannot program any more
tracks.
SCMS —
(Serial Copy Management System) If you are
trying to record digitally from a
“second-generation” digital copy, try analog
recording.