Radio Shack CD Player - Manual (Page 21)

21
• The recording time of a track may
slightly differ from the original one.
Serial Copy Management
System
This CD recorder is in compliance with the
Serial Copy Management System (SCMS)
standard. This standard has been elaborated
to restrict digital-to-digital copying to only
the first generation. The basic rules
governing this system are as follows:
Rule 1: A digital recording is possible from
a digital source such as a CD, DAT, or MD
onto a recordable CD-R, CD-RW, MD, or
DAT through a digital input connection;
however, further digital-to-digital recording
is prohibited for the second and later
generations.
Rule 2: When an analog source such as an
analog disc or FM broadcast is digitally
recorded by using a CD-R, CD-RW, MD, or
DAT, this recorded source can be digitally
recorded on another CD-R, CD-RW, MD, or
DAT; however, further digital copying is
prohibited.
Dubbing
1. Set the disc to be dubbed in the
PLAYBACK tray, and a CD-R/RW
recordable disc in the RECORD/
PLAYBACK tray. When a blank disc is
set in the RECORD/PLAYBACK tray,
BLANK appears.
2. Set the recording level. (See “Setting the
Recording Level” on Page 24.)
3. Repeatedly press DUBBING MODE to
set the dubbing speed.
DUBB 4X: high speed dubbing (four
times as fast as the normal playback
speed).
DUBB 2X: high speed dubbing (twice
as fast as the normal playback speed).
DUBB 1X: normal speed dubbing.
When you set the dubbing speed, the CD
recorder enters the pause mode until you are
ready to begin dubbing.
Notes:
• If a recordable disc is not set in the
RECORD/PLAYBACK tray, CAN’T
REC appears. Replace the disc with a
recordable one.
• The CD recorder automatically changes
the dubbing speed from 4X to 2X if it
finds a problem such as a scratched
disc.
• The slower the speed is, the more
tolerant the CD recorder is of errors on
the CD-R/RW disc. If you are in doubt
about the quality of the CD-R/RW discs,
select
DUBB 1X .
• If you intend to monitor the sound
during high speed dubbing, turn the
volume of your amplifier down enough
to prevent possible damage to your
system from the high-pitched sound.
• Analog output can be monitored at all
three dubbing speeds but digital output
can only be monitored at
1X .
4. Press g/ ENTER for the RECORD/
PLAYBACK tray to start dubbing. There
is a slight delay before the CD recorder
begins dubbing.