Roland KF-7 - Manual (Page 109)

109
Chapter 5 User Program Registration
Chapter 5
Saving the User Program
Sets
You can take the 36 User Programs saved to the [User
Program] button and save them as a set to a floppy disk, or to
user memory.
When saving to a floppy disk, first insert a floppy disk in the
disk drive.
→ For more on working with the disk drive, refer to “Using
Floppy Disks” (p. 99).
1.
Press the [User Program] button.
2.
Touch <File>.
3.
Touch <Save>.
A “Save User Program screen” like the following
appears.
fig.d-upgsave.eps_50
Giving a name to a set of User Programs
4.
Touch <Rename>.
The Rename screen appears.
When you touch , the cursor moves.
When you touch the icon for the character to be input,
the character appears at the cursor position. For example
touching the <ABC> icon in succession cycles you
through the available choices in that character group
(A
→
B
→
C
→
A...).
Each touch of <A-a-0-!> cycles the type of characters
through “English (upper case),” “English (lower case),”
“numerals,” “symbols,” then back to “English (upper
case).”
When you touch <Del>, the character at the cursor
position is deleted.
When you touch <Ins>, a space is inserted at the cursor
position.
5.
When you have finished with the name, touch <Exit>.
Determining the save destination
6.
Touch <Disk> or <User>.
Touch <Disk> if you are saving to a floppy disk; touch
<User> if you are saving to user memory.
7.
Touch to select the save-destination User
Program number.
If a User Program set name is displayed, a User Program
set saved to that saved to that number is already.
If you select a number with previously saved User
Program set data, then save a new set of data to that
same number, the older User Program set will be
deleted. If you don’t want to lose any previously saved
User Programs, select a number in the save-destination
column that does not yet have a name.
Save
8.
Touch <Save> to begin the save.
Touch <Exit> to return to the User Program File screen.
* Never turn off the power or eject the floppy disk from the disk
drive while the operation is in progress. Doing so will damage
the KF-7’s internal memory, making it unusable.
→ When clearing the set of saved User Programs, refer to
“Deleting Saved User Program Sets” (p. 110).