Roland KF-7 - Manual (Page 32)

32
Chapter 1 Performance
Chapter 1
Adding Effects to Each Tone and Voice
■ Applying Effects to the Sound (Effects)
You can apply a wide range of different effects to the notes you play on the
keyboard.
1.
First, press the Tone button to select a Tone (p. 21).
The “Tone selection screen” appears.
fig.d-octshift.eps_60
2.
Then, touch <Effects>.
The “Effect screen” appears.
fig.d-effects.eps_60
Applying effects to the sound
3.
Touch <ON>.
The effect selected with <Type> will be applied.
Setting the Effect
4.
Touch <Type> to select the type of effect.
5.
Touch <Depth> to adjust the amount of effect applied.
The amount increases as the value is raised.
You can also move the slider with the [-] [+] buttons and the dial.
Pressing the [-] [+] buttons simultaneously returns the slider to the initial value.
Touch <Exit> to return to the Tone selection screen.
For more on the effect types,
refer to the “Effects List” (p.
172).
NOTE
Selecting a different effect for
the left-hand Tone than the
one applied to the right-hand
Tone and Layer Tone may not
result in the effect you want.
Select the same effect as that
used for the right-hand Tone.
NOTE
When you select an effect type
that starts with “GS,” that type
of effect is also applied for the
chorus effect for the song or
Music Style (p. 46) selected at
that time.