Roland KF-7 - Manual (Page 12)

12
Panel Descriptions
Rear Panel
1. Mic
Volume Knob
Adjusts the volume level for the microphone (p. 18).
Mic In Jack
Used for connecting microphones (p. 18).
2. Computer
Computer Switch
Switches the connections for the MIDI connectors and the
computer port (p. 159).
Also, this switch is set to Mac, PC-1, or PC-2 according to the
type computer that’s connected.
Computer Connector
You can connect a computer to this jack to exchange
performance information (p. 159).
* You can’t use the MIDI Out/In connector and the Computer
connector at the same time.
3. MIDI Out/In Connectors
Connect between these and external MIDI instruments to
exchange performance information (p. 153).
4. Pedal Jacks
Connect the supplied damper pedal (DP-8), the expression
pedal (EV-5) or others (p. 16).
5. Line In Jacks
You can connect audio equipment or other digital instruments
and hear them through the KF-7’s speakers (p. 157).
6. Line Out Jacks
You can use these to play the notes from the KF-7 on an audio
device or record what you play on a tape recorder
(p. 157).
7. [Power] Switch
Pressed to switch the power on and off (p. 17).
8. DC In Jack
Connect the included AC adapter here (p. 16).
7 4 2 3 5 6 1 8