Roland KF-7 - Manual (Page 154)

154
Chapter 9 Connecting External Devices
Chapter 9
■ Making the Connections
921
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
1.
Turn the volume all the way down on the KF-7 and on
the device you’re about to connect.
2.
Switch off the power to the KF-7 and the device you’re
about to connect.
3.
Set the Computer switch on the rear panel to “MIDI.”
4.
Use a MIDI cable (sold separately) to connect the MIDI
connectors to each other.
Please refer to the connection examples below.
5.
Switch on the power to the KF-7 and the connected
device.
6.
Adjust the volume level on the KF-7 and the connected
device.
7.
You should also set the MIDI settings as needed.
For details on the MIDI-related settings, refer to
p. 155–p. 157.
Connection Examples:
Setup with a MIDI Sequencer
fig.09-10
* When the KF-7 is connected to a MIDI sequencer, set it to
Local OFF. Refer to “Disconnecting the Keyboard from the
Internal Sound Generator (Local On/Off)” (p. 156).
Connecting with a MIDI Sound Module
fig.09-
Synchronizing with
Connected MIDI Devices
You can have connected MIDI devices played by the tempo
produced by the KF-7; you can also have the tempo
produced by connected MIDI devices play the KF-7. This
setting is called the “MIDI Sync.”
Having connected MIDI devices work at the same tempo, and
start and stop at the same timing is called “synchronization.”
1.
Switch to the Basic screen, or press the One Touch
Program [Piano] button.
2.
Touch <Functions>.
3.
Touch <MIDI Sync>.
The following screen is appeared.
fig.09-04.eps
4.
Touch to make the setting.
* Unless the above is set to either “Int” or “Auto,” the KF-7’s
buttons cannot be used to adjust the KF-7’s tempo. Ordinarily,
you should set this to “Int.”
Touch <Exit> to go back to the Function screen.
KF-7
In Out MIDI
Roland MT Series
KF-7
OUT THRU IN
MIDI
Sound Module
Displayed Meaning
Int
Adjustment of the KF-7’s tempo and starting
and stopping of playback and recording is
performed by the KF-7.
Ext
The KF-7’s tempo as well as the starting and
stopping of playback and recording is con-
trolled by the MIDI device connected to the
KF-7’s MIDI In connector. When there is no
MIDI device connected, then tempo chang-
ing operation can not be controlled by the
KF-7
Remote
Playback and recording of songs is con-
trolled by the connected MIDI device.
Auto
The KF-7’s tempo as well as the starting and
stopping of playback and recording is con-
trolled by the MIDI device connected to the
KF-7’s MIDI In connector. When there is no
MIDI device connected, then these opera-
tions can be performed by the KF-7.