Roland KF-7 - Manual (Page 112)

112
Chapter 5 User Program Registration
Chapter 5
■ Simultaneously Switching User
Program and Transmitting PC
Numbers
You can have PC (Program Change) numbers be transmitted
to an external MIDI device when you switch the User
Program on the KF-7.
You can register PC number settings to each of the User
Programs, just as you can with button settings and other
settings preferences.
Calling Up the Performance Settings to Be Set
1.
Press the [User Program] button, then touch the name
of the performance setting you want to set.
Setting the Transmission of the PC
2.
Touch <PC Set> in the User Program screen.
The following type of screen appears.
fig-upgPCset.eps_50
3.
Touch for the parameter and make the settings.
4.
Touch <Exit>.
The User Program screen returns to the display.
Touch <Write> to save the setting to the User Program.
For more detailed information, refer to “Saving
Performance Settings (User Program)” (p. 107).
Display Description
Tx PC
Channel
This prevents the PC number from being
transmitted (Off), or sets the transmission
channel (Channel 1–16).
Bank
Select LSB
Sets the Bank Select LSB.
Bank
Select MSB
Sets the Bank Select MSB.
Program
Change Sets the Program Change messages (Pro-
gram Numbers).