Plasma description, Plasma front view – Runco PL-50XA User Manual
Page 11
10
1 POWER
Turns the plasma monitor’s power on and off.
2 REMOTE SENSOR WINDOW
Receives the signals from the remote control.
3 POWER
When the power is on it will light GREEN. When the power is on the standby mode, it will light RED.
4 INPUT SELECT / EXIT
Switches the input, in the following order. The available inputs depend on the setting of “BNC INPUT”.
RGB: VIDEO1 VIDEO2 VIDEO3 HD/COMP/DTV
RGB/PC3 RGB/PC2 RGB/PC1
COMP: VIDEO1 VIDEO2 VIDEO3 HD1/COMP1/DTV1
RGB/PC2 RGB/PC1 HD2/COMP2/DTV2
5 LEFT/- and RIGHT/+
Enlarges or reduces the image. Functions as the CURSOR ( / ) buttons in the On-Screen Display (OSD) mode.
6 VOLUME DOWN and UP
Adjusts the volume. Functions as the CURSOR ( / ) buttons in the On-Screen Display mode.
7 MENU
Sets the On-Screen Menu mode and displays the main menu.
PLASMA DESCRIPTION
» Plasma Front View
MENU / ENTER
INPUT SELECT
DOWN
UP
LEFT/-
RIGHT/+
/EXIT
VOLUME
4
5
6
7
1
Located on bottom
of Plasma
Located on bottom
of Plasma
3
2