Ricoh 3245 - Manual (Page 55)

Searching for a Destination
47
2
DDDD
Enter an IP-Fax destination to
search for, and then press [OK].
Note
❒ If you enter a wrong destina-
tion, press [
← ← ← ←] / [→ → → →] and [Back-
space] / [Delete All] and then
enter the destination again.
EEEE
Confirm entered IP-Fax destina-
tion and press [OK].
A search-in-progress message ap-
pears.
When the search is finished, a re-
sult appears.
FFFF
Select a destination.
Note
❒ If the desired destination does
not appear, use [ U U U U] or [T T T T] to
scroll through the list.
Search by LDAP Server
AAAA
Press .
BBBB
Press [Search LDAP].
CCCC
Press [Select Server].
DDDD
Select the LDAP server to search
for.
Note
❒ LDAP servers can be programmed
under System Setting. See Net-
work Guide for the details.
❒ Make sure at least one LDAP
server is highlighted. If no
LDAP server is selected, an er-
ror message appears after you
start searching.
EEEE
Press [OK].
FFFF
Press [Advanced Search].
JupterC2_Fax_EN-F_FM.book Page 47 Tuesday, November 30, 2004 2:47 PM