Ricoh 3245 - Manual (Page 81)

Sending by IP-Fax
73
3
Note
❒ When both the H.323 setting
and SIP setting are set to ON
under [IP-Fax Setting of Fax Initial
Settings]
, [Protocol] appears.
Press [Protocol] to select the pro-
tocol you want to use.
CCCC
To add a destination, press [Add].
If you do not want to add a desti-
nation, proceed to Step
E .
Note
❒ When using a destination list,
multiple destinations are added
automatically and you need not
press [Add].
DDDD
Specify the next destination.
Note
❒ Press
to switch the destina-
tion between fax number, e-
mail address, and IP-Fax num-
ber.
❒ To add another destination, re-
peat Steps C and D .
EEEE
Press the
{{{{Start}}}} key.
The machine starts to scan the orig-
inal and stores it in memory. When
scanning ends, the Communicat-
ing indicator lights and transmis-
sion starts.
JupterC2_Fax_EN-F_FM.book Page 73 Tuesday, November 30, 2004 2:47 PM