Ricoh LD335c User Manual
Page 141
Changing the Paper Size
129
5
FFFF
Square the paper, and then load it
in the tray with the copying face
down.
Important
❒ Do not stack paper over the lim-
it mark.
❒ Check the top of the paper is
aligned to the right side.
Note
❒ If there is space between the
side guide and paper, bring the
side guide flush against the
edge of the paper.
GGGG
Lock the side guide.
HHHH
Gently push the paper tray in un-
til it stops.
IIII
Check the paper size shown on
the display panel.
If you load a paper size that is
not selected automatically
If you load a paper size that is not se-
lected automatically, you need to
specify the paper size with the control
panel.
Following paper sizes that are not se-
lected automatically.
• B5 JIS
L
• 8
1
/
2
"
× 14" L
• 8
1
/
2
"
× 11" L
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press [System Settings].
CCCC
Press [Tray Paper Settings].
DDDD
Select the tray for which you want
to change the paper settings.
Note
❒ Press either of [Tray Paper Size:
Tray 2]
to [Tray Paper Size: Tray 4].
ZJKY290J
ADL027S
ZKVH210J
JupiterC2_GSG_EN_Pre_FM.book Page 129 Tuesday, December 28, 2004 1:39 PM