Ricoh LD335c User Manual
Page 151
Adjusting the Color Registration
139
5
Note
❒ Thick paper is needed for the ad-
justment. Prepare thick paper sim-
ilar to what you normally use.
AAAA
Load the A4
L
L
L
Lor larger thick pa-
per in the Bypass Tray.
Reference
For details about paper size and
the procedure for loading paper
in the Bypass tray, see “Copy-
ing from the Bypass tray”, Copy
Reference
BBBB
Press the
{{{{User Tools/Counter}}}}key.
CCCC
Press [Maintenance].
DDDD
Press [Color Registration].
EEEE
Press [Fuser Adjustment: Thick Paper].
Important
❒ When the toner cartridge is al-
most empty "Fuser Adjustment
cannot be performed. Replace
Toner cartridge." appears on the
panel display.
FFFF
Press [OK].
Auto Color Registration begins.
GGGG
Make sure that following mes-
sage appears on the display, and
then press [Start Printing].
Fuser Adjustment Sheet II is print-
ing. See p.141 “Checking the Fuser
Adjustment Sheet”.
JupiterC2_GSG_EN_Pre_FM.book Page 139 Tuesday, December 28, 2004 1:39 PM