Ricoh LD335c - Manual (Page 35)

Control Panel
23
1
Control Panel
This illustration shows the control panel of a machine with options fully in-
stalled.
1. Screen contrast knob
Adjusts display panel brightness.
2. {{{{User Tools/Counter}}}} key
• User Tools
Press to change defaults and condi-
tions to meet your requirements. See
p.54 “Accessing User Tools (System
Settings)”.
• Counter
Press to check or print the counter val-
ue. See p.158 “Counter”.
• Inquiry
Press to find out where to order ex-
pendable supplies and where to call
when a malfunction occurs. You can
also print these details. See p.156 “In-
quiry”
3. Indicators
Display the status of the machine or indi-
cate errors.
•
d: Add Staple indicator. See p.131
“
dAdding Staples”.
• D: Add Toner indicator. See p.116
“
DAdding Toner”.
• B: Load Paper indicator. See p.113
“
BLoading Paper”.
•
L: Service Call indicator
• M: Open Cover indicator
• x: Misfeed indicator. See p.119
“
xClearing Misfeeds”.
• Communicating: Communicating in-
dicator. See “Control Panel”, Facsimile
Reference <Basic Features>.
• i: Confidential File indicator. See
“Control Panel”, Facsimile Reference
<Basic Features>.
• Receive File: Receiving File indicator.
See “Control Panel”, Facsimile Refer-
ence <Basic Features>.
4. {{{{Adjust/Program Color}}}} key (copy
mode)
Use this key to adjust and register colors.
See “Color Adjustment”, “User Color”,
Copy Reference.
Note
❒ When image quality is adjusted, the
lamp in the {{{{Adjust/Program Color}}}} key
is lit.
5. Color circle
Refer to this when adjusting colors. See
“Color Adjustment”, Copy Reference.
6. Display panel
Displays operation status, error messag-
es, and function menus. See p.25 “Dis-
play Panel”.
7. {{{{Check Modes}}}} key
Press to check the entered copy job set-
tings.
AAE036S
JupiterC2_GSG_EN_Pre_FM.book Page 23 Tuesday, December 28, 2004 1:39 PM