Ricoh LD335c - Manual (Page 57)

Using the Document Server
45
3
BBBB
If you need to change print set-
tings, press [Print Settings].
The Print Settings display appears.
User names, file names, and print
order of documents appear.
Note
❒ Print settings made for printing
in copier or printer function re-
main after printing and applied
to the next job. Print settings
made in facsimile mode, how-
ever, do not remain.
❒ If you select multiple docu-
ments, the print settings will re-
m a i n a p p l i e d t o t h e f i r s t
document, but not to other doc-
uments.
❒ Print setting items are listed be-
low. For details about print re-
sults of each setting, see Copy
Reference.
❖ ❖ ❖ ❖ Binding format
• 2 Sided Copy Top to Top
• 2 Sided Copy Top to Bottom
• Magazine
• Book
❖ ❖ ❖ ❖ Cover handling
• Cover/Slip Sheet
• Edit/Stamp
❖ ❖ ❖ ❖ Finish
• Sort
• Rotate Sort
• Stack
• Staple
• Punch
❒ If you print more than one set
using the Sort function, you can
check the print result by print-
ing out only the first set. See
p.46 “Sample copy”.
❒ When multiple documents are
printed at the same time, you
can combine them into a single
set by adjusting the print order.
❒ When multiple documents are
printed at the same time, print
settings made for the document
printed first are applied to all
other documents.
❒ If you select multiple files, you
can check file names or print or-
der selected in step
A by scroll-
ing the list using [
T T T T] and [U U U U].
❒ Press [Select File] to return to the
Select Files to Print display.
❒ The preset stamp function is not
available for documents stored
in facsimile mode.
CCCC
Enter the required number of
prints using the number keys
Note
❒ Up to 999 can be entered.
DDDD
Press the
{{{{Start}}}} key.
Printing starts.
To stop printing
AAAA
Press the
{{{{Clear/Stop}}}} key.
BBBB
Press [Stop].
JupiterC2_GSG_EN_Pre_FM.book Page 45 Tuesday, December 28, 2004 1:39 PM