Ricoh Aficio GX7000 - Manual (Page 150)

After changing this setting, turn the printer off and then back on.
• Off
• On
Default: Off
Unit of Measure
You can switch the measurement between “mm” and “inch”.
• mm
• inch
: Default: mm
: Default: inch
Ink CU Replace
You can reset the ink storage counter when replacing the ink collector unit.
Env.Slctr.Alert
You can specify whether or not to enable the Env.Slctr.Alert function.
• Display Alert
If you attempt bidirectional printing on sheets when the envelope selector is in the (rear) position,
printing does not begin and an error message notifying you that the envelope selector is incorrectly
set will appear.
• No Alert & Prnt
Regardless of the envelope selector position, the printer ignores the error and continues printing.
Default: Display Alert
Changing the System Menu
This section explains setting Energy Saver mode as an example of how to change a System menu setting.
1. Press the [Menu] key.
BAG053S
5. Maintaining
148
5