Ricoh Aficio GX7000 - Manual (Page 38)

3. Using a coin, turn the network interface board cover screw counterclockwise, and then
remove the cover.
BAJ040S
4. Remove the spacer in the network interface board cover.
AKR130S
The removed spacer will not be used again.
5. Align the network interface board notch with the triangular mark on the printer, and then
push in the network interface board by pressing the part marked “PUSH”.
BAJ083S
6. Reattach the network interface board cover to the printer, and then secure it with the screw
provided.
• Be sure to push the network interface board fully into the printer.
2. Preparing for Printing
36
2