Envelope selector position mismatch, Check the position of the envelope selector, Check the printer driver settings – Ricoh Aficio GX7000 User Manual
Page 241: See p.239 "envelope selector position, Mismatch, See p.239 "envelope selector position mismatch
5.
Plug the network interface board in securely, and then secure it by turning the screw.
6.
Plug the printer's power cord into a nearby wall outlet, and then turn the printer on.
If the message reappears, contact your service representative.
Envelope Selector Position Mismatch
The envelope selector is in the wrong position or the printer driver settings are wrong. Set the envelope
selector to the right position or change the printer driver settings. Alternatively, press the [Form Feed /
Head-cleaning] key, select a tray containing paper of the required size, and then print. To cancel the print
job, press the [Job Reset] key.
Check the position of the envelope selector
1.
For envelopes, set the lever to the rear position
; for everything else, set the lever to
the forward position .
BAJ058S
Check the printer driver settings
1.
In the application, open the printer properties dialog box.
2.
Click the [Setup] tab.
3.
Check the [Paper type:] setting.
Select the paper type from the [Paper type] dropdown list. For envelopes, select [Envelope].
Status Monitor Errors
239
6