Ricoh Aficio GX7000 - Manual (Page 33)

2. Preparing for Printing
Setting Up the Hardware
This section explains how to install the printer.
Checking the Computer and Installation Area
The printer's location should be carefully chosen because environmental conditions greatly affect its
performance.
The area where the printer is to be placed
• To avoid malfunctions, position the machine away from the following:
• direct sunlight
• flow of air from air conditioners or heaters
• radios, televisions, or other electronic devices
• areas of high/low temperature and high/low moisture
• humidifying appliances
• oil stoves and ammonia-emitting appliances (such as diazo copiers)
Choose a flat, stable area to install the machine.
• The surface should be level within two degrees, left to right and front to back.
• To prevent condensation, install the machine in an area where temperature and humidity conditions
do not exceed those indicated in the diagram below.
• The machine may cease to print if these limitations are exceeded.
31
2