Attaching the options, Attaching the network interface board type gx3 – Ricoh Aficio GX7000 User Manual
Page 37
3.
Lift the printer and move it to the place where you want to install it.
Always lift and carry the printer with another person. Grip the indented area at the base of the printer's
sides, as shown. Lift and carry the printer slowly and carefully.
BAJ017S
4.
Remove the orange tape from the printer body.
• We recommend you keep the box, so you can use it again when relocating the printer.
• Remove all the orange tape, except the tape around the power cord.
• USB and LAN cables are not supplied.
Attaching the Options
Attaching the Network Interface Board Type GX3
• Before touching the network interface board, ground yourself by touching something metal to
discharge any static electricity.
• Do not subject the network interface board to impact or other physical stress.
1.
Check the product and its supplied components.
2.
Make sure the printer's power cord is unplugged.
Setting Up the Hardware
35
2