Radio Shack CT-354 - Manual (Page 39)

39
RING VOLUME
You can select one of these three ring volumes for
the phone:
• RINGING LOW — the ring is quiet.
• RINGING HIGH — the ring is loud.
• SILENT SERVICE — the phone does not
ring. Instead, the keypad and display back-
lights flash,
CALL flashes on the display, and
the phone sounds a short beep. This setting
also turns off the phone’s keytones (even if the
keytones feature is set to ON).
Follow these steps to set the ring volume.
1. Press . The phone displays the cur-
rent setting ( RINGING HIGH , RINGING
LOW , or SILENT SERVICE ).
2. Repeatedly press or to scroll
through the other settings. The phone displays
each setting and sounds the corresponding
ring twice.
3. When you hear or see the setting you want to
use, press to select and store that set-
ting.
Note: If you select SILENT SERVICE, the phone
displays SILENT when there is no call in progress
and when you are not using another function.
17-1165.fm Page 39 Wednesday, July 21, 1999 2:46 PM