Radio Shack CT-354 - Manual (Page 42)

42
USING CALLING CARD DIALING
Storing a Calling Card Number
The calling card feature lets you select from three
preprogrammed long-distance carrier names and
store a long-distance calling card number in the
phone’s memory, so you can place long-distance
calls from this phone using that number.
Follow these steps to select a carrier name and en-
ter your calling card number.
1. Press , then repeatedly press or
until the phone displays CALLING
CARD .
2. Press . The phone prompts you for your
4-digit lock code ( LOCKCODE? )
3. Enter your 4-digit lock code, then press .
The phone displays the name of the last
selected carrier, or
NO CARD if no carrier has
been selected.
Note: If you enter the wrong lock code, the
phone displays
CODE ERROR . Start again at
Step 1 and enter the correct code.
4. Repeatedly press or until you see
the carrier you want to use, then press .
If you select NO CARD , the phone erases all
card information and exits the menu. If you
select one of the preprogrammed carriers, the
phone prompts you for that carrier’s network
access number (
ACCESS NUMBER? ).
17-1165.fm Page 42 Wednesday, July 21, 1999 2:46 PM