Radio Shack CT-354 - Manual (Page 46)

46
PIN CODE DIALING
For security, some cellular service carriers require
you to dial a personal identification number (PIN) in
addition to the phone number each time you place
a call. This is sometimes referred to as “PIN code
dialing.”
Notes:
• This service is not required (or available) on all
networks. Check with your local service pro-
vider.
• If you subscribe to this service, a PIN code is
assigned or selected at the time you activate
your phone.
If you subscribe to PIN code dialing with your cellu-
lar carrier, you can store the PIN code into your
phone’s memory and set the phone to automatical-
ly send the code at the press of a button when you
place a call.
Follow these steps to program your PIN code and
turn PIN code dialing on or off.
1. Enter
(this spells * # PIN CALL #).
The phone prompts for your PIN code ( PIN
CODE? )
2. To store your PIN code in the phone’s memory
and turn on PIN code dialing, enter your PIN
code (maximum of 4 digits), then press
.
PIN CALL ON appears briefly.
17-1165.fm Page 46 Wednesday, July 21, 1999 2:46 PM